Hubba Hubba

Well today we managed to get the hubs dismantled and cleaned up and painted.

Spent A LOT of time removing the 1970's dirt from around the sprocket side hub.   Also made a start on the hand polishing of the fins, started with 240 Grit paper then working up to 400 then will work it with a buffing wheel and compound.

Just ordered a new set of front and back wheel bearings from Pyramid Parts as these bearings had more crunch than the gobble doc on crack.  Hopefully get them by the end of the week.


Popular posts from this blog

Harley XR1200


Customer Feature - Honda CB350 Scrambler